Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's subtle, doesn't have keys or LEDs and is concealed within the vehicle's wiring.
The user can also deactivate the system temporarily using Transport Mode when renting out their car. This guide will guide you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning and relay attacks. The system is directly connected to the ECU of your car and protected by a pin code that you choose. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It cannot be disabled using circuit cuts.
The system is easy to use, but professional installation is recommended to ensure a smooth connection with the ECU of your vehicle. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's security package.
First, the installer must disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After the battery has been disconnected, the installer may safely begin working. Basic hand tools can be used for precise connections. A multimeter is useful to check electrical values. Cable tie and insulation tape are essential to protect connections and keep wiring neat. The Ghost Immobiliser user's guide will provide specific instructions specific to your particular model.
During the installation process, it's important to choose the right grounding location that is free of debris and paint. The installer must also make sure the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on the vehicle's ECU. Based on the model, these wires may need to be soldered or plugged in. A top-quality connector is recommended to ensure a sturdy and secure connection.
After the installation is completed After the installation is complete, the customer can turn on Transport Mode. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. To accomplish this, the customer has to hit the button for service on the dashboard five times within 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. autowatch ghost immobiliser cost 's an excellent option for anyone who regularly rents out their vehicles through platforms such as Turo. An immobiliser can reduce the cost of insurance, as it lowers the chance of theft.
Getting Started
If you are looking for a solution to safeguard your vehicle from theft, you can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started even if a criminal steals or copies the key. It's possible because of its advanced technology that stops the engine from starting until the right PIN code is entered.
The device connects to the vehicle's bus network CAN and allows direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the ultimate security system that protects your pride and joy and will ensure its value in the event that you decide to sell it in the future.
Installing a Ghost immobiliser is easy however, you must follow the directions to avoid electrical problems and malfunctions in the system. First, you must locate a 12V power supply and a suitable grounding for the chassis of your car. After that, you can begin connecting the wires for the immobiliser. Make use of high-quality connectors and soldering methods to create a solid connection. Make sure to shield the connections with heat shrink tubing, insulation tape or other materials to avoid short circuits in electrical power.
Once the wires are connected, you can connect the battery and then turn on the engine to test the immobiliser's functionality. When everything is functioning correctly you can place it in a secure place under the dash or somewhere else in the vehicle. Make sure to hide it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it is in compliance with the highest standards of security and is a great protection against car thieves. It is impervious to key cloning and hacking and is not able to be disabled without the code. It is simple to use, and it can be set to an option for a service valet so that your vehicle will not be activated if you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. Ghost Immobiliser doesn't interfere with the factory settings of your vehicle, unlike other aftermarket systems that require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanning devices. This is because the system does not transmit and receive radio frequency signals, and it uses the CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
Enter the sequence to disarm (either two or one buttons) and turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. After that, you are able to start your car and drive away in peace.
Once installed Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking while preserving the value of your pride and joy. If you ever need to hand over your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and able to be touched. It is also recommended to use cable ties to bundle and secure the wires. This will decrease the chance of being tampered with by thieves. To avoid committing mistakes, make sure to double-check these points and mark them with labels or tape. Examine every connection for signs that they are wearing out. Connections that are loose can cause malfunctions in the system, so make sure that they're firmly in place and securely insulated. Make ghost 2 immobiliser problems to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit functions properly and that all connections and insulation are secure. Be sure to fix any problems immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that is integrated into your car's ECU to block the engine from starting without authorization. Its cutting-edge technology safeguards your car against key cloning and hacking and other common tactics that thieves employ to steal vehicles. The Ghost is also able to work in conjunction with existing alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unparalleled features, paired with its secluded design makes it a sought-after option for both drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation to ensure a proper integration of Ghost Immobiliser. Consult the wiring diagram of the vehicle to aid you in locating and connecting the wires. The next step is to determine the power and grounding sources. Once you've located them, you will need to mark the points so that they are easy to locate during installation. It is essential to use top-quality materials and tools. Basic hand tools can help you make precise connections. A multimeter will verify electrical values and guarantee safety. Cable ties and insulation tape can help keep connections tidy and neat. A Ghost-specific user's manual is also available.
It is important to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser functions as intended and stop unauthorised vehicle starts. It's recommended to perform this procedure regularly as part of your routine inspections of the vehicle to ensure the system is always functioning properly.
After the installation is completed, you can drive your vehicle with confidence. The Ghost will help keep your pride and joy safe from would-be thieves and ensure that no one can drive off with your vehicle without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This will allow you to track your vehicle if it is stolen.
The Ghost is compatible with a variety of vehicles, including those made by most major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to the strictest standards and procedures for installing our products. This assures customers, insurance companies and law enforcement officials that all installations are performed safely and in a correct manner.