Autowatch Ghost Installation
Autowatch Ghost is an immobiliser that safeguards you from key-cloning and hacking. It also prevents vehicle theft. It could lower your insurance costs and you could be eligible for incentives.
Discreet and easy to use easy to use, the Ghost immobiliser is built into the vehicle's ECU. This makes it impossible to start the engine without an encrypted PIN code.
TASSA Approved
If you want to protect your vehicle from being stolen by key cloning, then you will need to get the TASSA certified Autowatch Ghost immobiliser system. It is the latest technology in car security and deter thieves in two ways. It will stop your car from starting if the keys are duplicated, and it will stop you from driving away if they've stolen your keys.
This next generation device is connected to your vehicle's CAN data network. A personalised PIN code is entered through the vehicles standard buttons on the dashboard or the steering wheel. The Ghost is then able to stop the engine from beginning and can be programmed to any number of different settings, including Gear Blocking Change, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and does not use radio frequency signals so that it cannot be detected by RF scanners or a code grabber.
The Ghost is a small, weatherproof device that is sealed to allow it to be hidden in the vehicle or placed on the dashboard, where it is nearly impossible for thieves to locate. It is not an Thatcham Category Approved product however it is recognized by insurance companies as an efficient anti-theft device. It also comes with a five years of warranty.
The TASSA verification process guarantees that any installation work carried out on the Ghost will be done so by a qualified and experienced installer. This gives the customer's, insurers and police confidence in the quality installation. It also guarantees that the installers follow the manufacturer's instructions and set up the product in a safe and correct manner. Installers who are TASSA members are committed to excellence, and want to contribute to the fight against crime.
Compatible with a range of vehicles
The Autowatch Ghost 2 immobiliser is an advanced device that protects your vehicle from key copying. Its PIN code system has been integrated into the car's ECU making it harder for thieves to copy the keys or hack the vehicle's system. The device is also discrete and can easily be installed in a variety of vehicles, including minivans and sports cars. It's also weatherproof, and small enough to be hidden out of sight, making it even harder for thieves to find.
Installation of the Ghost is simple and does not require any additional wiring. It is compatible with a variety of vehicles and utilizes the CAN data network of the vehicle to communicate with the vehicle. Additionally, it can be turned off or disabled by using the main screen of the vehicle. The device is also compatible with a range of mobile apps, making it easier for you to manage your vehicle's security remotely.
The Ghost could have issues following installation, despite its many advantages. These issues could be caused by a variety of reasons, such as faulty wiring or an app that is not compatible with the Ghost. In these cases, speaking with an expert installer is the best option to solve the issue.
Another issue faced by users is difficulty in entering the sequence of disarming the Ghost. This is usually due in part to forgetting the proper sequence or not practicing it. However, the user manual contains an emergency code that can be used in case of such issues.
The shrewd
Autowatch Ghost is a discreet and sophisticated security system that protects your vehicle against theft. linked website is invisible to thieves and utilizes the CAN data network of your vehicle to function. It also has the ability to be triggered by other security systems, such as alarms for cars, and provide real-time alerts for calls to the owner. These features can assist the police in finding your vehicle if it is stolen.
This system can be put in place in just a few minutes and is compatible with the majority of vehicles. It's an aftermarket device TASSA-approved that's compatible with vehicle trackers, and is even recognised by some insurance companies. It's also tamperproof and quiet, so criminals won't be hearing it operate. The Ghost immobiliser can also be programmed to require a PIN of up to twenty digits. This makes it nearly impossible to determine the PIN.
Ghost is only available only in the Service/Valet Mode. This means that you aren't giving the PIN number to a mechanic or other person who may need access to your vehicle's computer system. The Ghost also has a five-year guarantee.
The Autowatch Ghost immobiliser is a revolutionary security system that can stop key cloning, ECU hacking and car theft. It's an aftermarket CAN bus device that's a fantastic alternative for both older and new cars. It's simple to install and operates quietly, so it can be put in any vehicle without cutting wires. You can also alter your pin in a matter of minutes so that only you know it. It is also unnoticeable because it doesn't utilize RF scanning technology, or code-grabbing technology.
Simple to use
Autowatch Ghost is a highly efficient and innovative security system that disables the engine to prevent vehicle theft. It uses a personalised code created by the vehicle owner, that must be entered before the car can begin. This technology is extremely advanced and enhances the overall safety of your vehicle and is a preferred choice among many motorists. The process of installing it isn't without its challenges. It requires careful planning and attention to the smallest of details. This includes ensuring compatibility and relying on expert knowledge, adhering legal regulations, and understanding the Ghost II's operating dynamics. Prioritising these factors will ensure a successful installation and optimal functionality.
Contrary to other systems, the Ghost II is silent and can't be spotted by thieves. It is also tiny and weatherproof, making it very difficult to get into. It is compatible with CAN Lenastark, CAN, as well as other vehicles. It is also able to be utilized in vehicles that require isolation of the battery to ensure maintenance. The Ghost 2 has a Transport Mode which disables the device while your car is being rented or loaned.
Before you can start the Ghost 2, you will have to enter a PIN code that is unique to you. Installers will create an initial code, however it is recommended to change it as quickly as possible to ensure your security. The device can go into sleep mode in order to save battery power, but it will re-wake when it detects an engine management signal. This feature can be turned off by going to the Settings menu. It is advised to only use the Ghost immobiliser while your vehicle is being driven, and to always make sure to lock it when leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security system that deters car theft by removing the engine of the vehicle. It operates through a personalised code that only the owner knows which makes it a powerful protection against thieves. Installing this device requires careful attention to detail and careful preparation. By following the law, adhering strictly to the law, and relying on expert knowledge will ensure that the installation process is smooth and make the most of this security solution.
This unique CANbus immobiliser from Autowatch is easy to install, and operates in a quiet manner, so that criminals are unable to hear it working. It makes use of CAN bus communications to communicate with the vehicle. It is compatible with a large variety of vehicles. It is a breakthrough in vehicle safety. It shields you from key cloning and theft from your vehicle. It is small and weatherproof, making it difficult for criminals to change or locate.
To get started with your Ghost Immobiliser You must look up the wiring diagram of your vehicle and identify the CAN high (CAN H) and low (CAN L) wires. Connect the CAN high and CAN low wires to the ECU. These wires can be found under the dashboard or near the engine.
It is best to work with an experienced and reputable installer for the installation of your Ghost immobiliser. You can be sure that the system will be installed correctly and won't hinder your vehicle's operation. The installer will also be able to provide you with tips on how to make use of your new device.